Asphalt Shingle and EPDM Roof Snow Guards

TPO and EPDM Rubber Roof Snow Guards

• Unique membrane mounts do not harm the roof.

• Membrane mounts are made of stainless steel and aluminum.

• Designed to be fastened over the base membrane layer.

• A large 12-inch base can be flashed over for leak-free installation.

SnoBar and ColorBar products can be securely installed on membrane or TPO-type roof systems with our unique membrane mounts without endangering the roof, damaging the membrane, or voiding warranties.The membrane mounts are constructed using a 12-gauge 304 stainless steel plate, two 304 stainless steel studs, and one extruded aluminum ColorBracket mount. Six predrilled screw holes provide mechanical fastening to new or existing roof structures.They are designed to be mechanically fastened over the base membrane layer, with a waterproof seal formed by flashing over a 12" x 12" square of membrane.

Asphalt Shingle Roof Snow Guards

• For fast and easy installation, slide the hook under the shingle.

• Easily engages in the exhisting shingle fastener.

• Pre-assembled, heavy-duty 16-gauge 304 stainless steel strap.

• Untilizes the proven polycarbonate SnoBlox Deuce snow guard.

This is a non-corrosive polycarbonate snow guard designed for slate, asphalt shingle, and composite tile roofs. Simply slide the Shingle Snow Guard up under the tile or shingle to the desired position, then pull it down to catch on the existing fastener.