The large forward mounted 4” Wide face provides a generous holding field and the 1.5” wide base fits most 36” panels with 9” flats. No need to purchase silicone to seal between the roof and the guard because there is a 1/16" V7242 CCF PVC foam pad included. The Professional ATI test results show the Standard SnowCatcher held up to 3923 pounds when attached with two #14 screws. The durable 16 gauge 304 stainless steel construction does not get brittle like cheap fabricated cast guards. Please see the link that gives recommendations for snow guard spacing before purchasing.
Additional Information:Recommended for screw down application only. The SnowCatcher requires two #14 screws per guard, the third hole can be used for an extra screw, but it is intended as a hanger for powder coating. When the screw option is selected, 3 screws per snow guard will be sent but only 2 are required. MetalRoofSnowGuards.com does not recommend adhesive mounting this guard. Placement in isolated areas such as chimneys, doorways, vents and partial roof sections is NOT recommended. Screws are sold separately. Slight variations in the mill finish are not cause for rejection. Also available in 11 TGIC Polyester powder coated colors.
SnowCatcher Cut Sheet SnowCatcher Specification Sheet
Select a row below to filter reviews.