The SnoCleat PBR is a screw-down pad style snow guard
specially designed for mechanically fastened R-Panel and PBR-Panel metal roofs.
The 6 holes are pre-drilled so the guard can be easily screwed down through the
roof sheet into a purlin. This device is mounted utilizing a minimum of four
#14 roofing screws with neoprene washers. Additional fasteners may be used in
the remaining holes if extra holding strength is desired. A foam gasket is
supplied for installation between the guard and the panel, eliminating the need
for glue or liquid sealant. The SnoCleat PBR features a large 4-Inch-wide face specifically
designed to accept an optional 4-inch-wide by 2-inch-tall color strip to match
your roof. The face of the guard is fastened to the base with 2 tek-screws.
Installation Instructions Cut Sheet Spec Sheet